Products

Road Construction Machinery 180HP Motor Grader GR1805T Motor Grader with Ripper and Blade

Road Construction Machinery 180HP Motor Grader GR1805T Motor Grader with Ripper and Blade

GET A QUOTE

Introduction

Introduction

Road Construction Machinery 180HP Motor Grader GR1805T Motor Grader with Ripper and Blade manufacture

Contact Way

Bailey Chen- Sales Manager

Tel: +86-15161767769

Email: [email protected]

Product Overview

Road Construction Machinery 180HP Motor Grader GR1805T Motor Grader
with Ripper and Blade

PRODUCT FEATURE
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:

* Energy saving and noise reduction: adopt low speed engine transmission line, low fuel consumption and energy saving and environmental protection; The transmission system is equipped with low speed ratio, and the average fuel consumption is reduced by about 8%. Three levels of engine, cab and seat vibration reduction; The cab is supported by six points; Deceleration of engine, cooling fan with large diameter, sound absorption sponge inside the hood, good sealing of the cab reduces noise of the whole machine.

* Strong power: Shang-chai efficient China stage III engine and hydraulic torque converter, the optimal torque converter achieves the best matching of torque converter and engine, reducing the start time, increase the work of torque output at low speed, strong and powerful. The optional herringbone tread tires, the adhesion can be increased by 10% in loosing soil and leveling, further enhance the power output.

* Rotation with load: improve the pressure of hydraulic system system, the rotary force of the blade, the high frequency quenching treatment improves the wear resistance and life span, and realize the rotation operation.

* Efficient operation: improves the displacement of hydraulic pump and hydraulic motor, increase the oil cylinder speed by 20%, realizes the industry leading work efficiency, the optimized blade shape can turn and remove the soil quickly and efficiently, and realize optimal load distribution and the minimum material accumulation within the rotary discarea.

Product Parameters

Item					GR1805T
Basic parameters	Engine model			SC7H190.1G3
		Rated power/speed			140kW/2000rpm
		Overall dimension (standard)			8900x2625x3420
		Total weight (standard)			15400 kg
		Tire specification			17.5-25
		Ground clearance (front axle)			430mm
		Tread			2156mm
		Space of front and rear axles			6219 mm
		Space of middle and rear wheels			1538 mm
Performance parameters	Forward velocity			5/8/11/19/23/38km/h
		Reverse speed			5/11/23km/h
		Tractive effort f=0.75			≥79 kN
		Maximum gradeability			≥25%
		Tire inflation pressure			260kPa
		Working system pressure			20MPa
		Transmission pressure			1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel			±48°
		Maximum slant angle of front wheel			±17°
		Maximum oscillating angle of front axle			±15°
		Maximum oscillating angle of equilibrium box			±15°
		Maximum steering angle of frame			±27°
		Minimum turning radius			7.3m
		Scrape knife	Maximum lift height	400mm
				Maximum cutting depth	500mm
				Maximum tilt angle	90°
				Cutting angle	28°-70°
				Angle of revolution	360°
				Length & chord height	3660x610mm
Oil filling amount	Coolant			50L
		Fuel tank			280L
		Engine			24L
		Transmission			38L
		Balancing box			46L
		Drive axle			28L